Pittsburgh, Pennsylvania, United States 
ya, lighter than the dh, but i would make sure you are running dh tires if you ride rough stuff so you wont get a flat 
1614663
downhilldro
wrote
Feb 21, 2010 at 13:17
Feb 21, 2010 at 13:17
i am not selling my helmet, but are you selling any of those iron horse decals, i just painted my sunday and use those
1580875
rav400
wrote
Feb 4, 2010 at 4:37
Feb 4, 2010 at 4:37
Yeah, I'm friends with Justin. We ride together alot in the summer. Looks like you have and re-did his old Iron Horse. Looks pretty good!
1444919
glorydh888
wrote
Nov 23, 2009 at 18:38
Nov 23, 2009 at 18:38
I took the bearings out, and replaced them with ceramics when I put it back toghether
1444661
richimpulse
wrote
Nov 23, 2009 at 16:18
Nov 23, 2009 at 16:18
I nitromorsed the swingarm with the bearings in but only because i knew i was replacing them. The nitromorse would break the seals down. You can do the bearings yourself but you risk them going in at an angle when re fitting.
1443096
glorydh888
wrote
Nov 22, 2009 at 23:36
Nov 22, 2009 at 23:36
I used aircraft paint stripper in an aerisol can. Got it from shucks, or any auto parts store, and then after the paint was off I used 000 grade steel wool, slighty wet, and then to get the polish I used some stuff called Nevr-Dull, you can get it at Home Depot.
1441791
richimpulse
wrote
Nov 22, 2009 at 11:15
Nov 22, 2009 at 11:15
Hey buddy.
I took the swingarm off my kumicho to my local bike shop and let them do the hard work of getting the bearings out and pressing them back in
I took the swingarm off my kumicho to my local bike shop and let them do the hard work of getting the bearings out and pressing them back in
Feb 21, 2010 at 13:35